I’ve finally figured out the secret to realistic looking aged wood (without waiting a century for nature to take its course!) Lucky for us, this simple DIY technique can be done with just a few tools in five steps:
PinIt all came about when I was looking for an antique elm wood stool for our living room. You’ve probably seen them in your Instagram feed, Pinterest and in the pages of magazines. They come in the form of tables and benches as well, as you can see here in Michelle Janeen’s living room:
PinThey’re the perfect mix of simple, rustic and chic, and I’ve been wanting to get my hands on one. The only problem? The price tag is usually in the hundreds, and they’re in limited supply since these are antiques and not mass produced.
I knew there had to be a way to recreate the look on a budget, and set out to find the most inexpensive stool to start with. Amazon to the rescue!
At only $35, it was a no-brainer. I bought the 18″ size, which is perfect for a small side table in our living room (update: they just raised the price yesterday after a bunch of you bought them up, but it’s still a great deal!) Here it is next to our sofa:
PinIt looks out of place in this photo because it clashes with the deeper wood tone and rustic style of our coffee table.
PinThe goal was to make the smooth, new wood look authentically aged and rustic, and stain it to match the tone of the coffee table. I’ve done my fair share of rustic wood DIY’s in the past, but this time I decided to introduce a couple new tools to my arsenal.
Tools to age wood
Pin- Orbital Sander – one of my most used and loved tools. A Mouse sander works just as well (in fact it’s easier to get into tight spaces) but the orbital is a bit faster.
- Planer – this tool shaves down wood with a spinning blade and is super useful for many woodworking projects. If you don’t own one and don’t want to get one, try using a hand planer or wood file (it will just take a lot longer!)
- Jigsaw – a basic DIYer’s essential, this tool has a reciprocating blade that makes quick straight cuts.
- Drill with wire brush attachment – These coarse wire brushes are designed for heavy duty surface removal (rust, layers of paint, etc). This set on Amazon is a great deal!
There are many different ways to go about making new wood look old, and I’ve tried a lot of them, but the combination of the above tools have produced the best results in the shortest amount of time. I always recommend experimenting with your technique and seeing what you like! There is no one “right” approach.
PinHow to age wood
I tested each tool on a piece of scrap wood first to get the hang of things, and I’d highly advise you to do the same. To begin, I grabbed the tool that does the most damage—the planer.
Step 1: Plane the surface
PinI started by planing down the edges in random spots, then did the same along the flat surfaces. The goal is to make the wood look worn and uneven by getting rid of the straight, smooth lines.
PinDon’t be afraid to take a few bigger chunks out, too! It can look pretty extreme but the sander will smooth it all out. The planer is a powerful tool and can take a little while to get comfortable with it, so make sure to get some practice runs in first.
PinOnce the wood was sufficiently mangled, it was time for…
Step 2: Make cuts with a jigsaw
PinThis is where you’ll recreate the look of saw marks, etching grooves and lines as you run the jigsaw back and forth along the wood. I shared a couple videos of this process in my Instagram stories (definitely give those a watch if you plan on doing this project!)
PinYou’ll want to spend some extra time on the edges, cutting deeper grooves to make it look like raw wood edges.
PinMake sure to carry the grooves over along the top, and cut some at an angle.
PinKeep going until you’ve covered each surface and are happy with the level of distressing.
PinAlright, the heavy duty stuff is over!
Step 3: Sand the wood
Now it’s time to level out the roughness. Real aged wood that has been around for decades is smooth as it has been worn down over time. We don’t want any visible fresh cuts or rough edges.
PinAn orbital sander makes fast work of this, but you’ll find that if you sand too much, you’ll start to erase some of the jigsaw marks. You can either sand those areas a little less or go back and make deeper grooves with the jigsaw. This is the fastest step and shouldn’t take longer than 15-20 min or so.
Finally, we have the last and most important step. The secret ingredient to getting that real aged look.
Step 4: Open the grain with a wire brush
PinThis was actually my first time using wire brush attachments on my drill, and I found a great deal on this set on Amazon:
PinI played around with a couple different attachments, but the largest disc was my favorite so I stuck with that. The coarse wire cuts deep, tiny grooves into the wood, opening up the grain.
PinThis is the texture you’ll find on old wood that has been worn away by the elements and fluctuating conditions over time. I was pretty blown away with the results and wondered how I’d never thought to try this sooner…
PinAfter running the brush along the wood going with the grain, I held it perpendicular to the wood and went against the grain in random areas. This step definitely takes the longest, but it makes the biggest difference (and it’s pretty fun!). I also went over any areas that the sander missed where the cut marks were too clean.
PinThis step took me a couple hours, but you can do less or more to your preference. Finally, it’s ready for the finishing touch!
Step 5: Stain and seal
PinI grabbed a couple stains from my garage that I thought could be a good match, and did a quick test. Here I’m using two of my favorites, Minwax Weathered Oak and Special Walnut.
PinI assumed since the wood was so light that it would play nicely with the stains, but it applied much warmer.
PinSpecial Walnut would have been way too brown, so I went with Weathered Oak and brushed on a light coat.
PinThis proves you can never trust the color in the can! Your wood is what determines the color output.
PinI looked in the garage again and found a can of Driftwood, which is slightly grayer than Weathered Oak.
PinAfter the first coat was dry, I gave the stool a second coat of Driftwood. And it looked pretty good!
PinIf I had to do it all over again, I’d skip the Weathered Oak stain and only use Driftwood.
The Results
Time for the real test… a side by side next to our coffee table.
PinNot an exact match, but I wasn’t done yet. I found a can of black wax and figured I’d give it a shot (I’m using Maison Blanche chalk wax, but any black or dark wax will do).
PinYou simply rub it on the wood with a cloth and it settles into the grooves, making the texture more defined. The wax also darkened and neutralized the wood tone a little. I’d say the color is pretty close!
PinYou’ll want to protect your finish by sealing it with a varnish. I gave mine a few coats of this matte polyurethane, which is water based for easy cleanup and dries invisible.
PinNow this side table fits right in with the coffee table!
PinHaven’t decided if I’ll keep it next to the chair or over by the couch yet…
PinI considered getting two, but we haven’t had a need for the extra table space yet. I can always make another one!
PinWhat do you think? Pretty convincing as an antique, right?
PinI love it when DIYs work out so well, especially when anyone can do it in 1 day on a budget!
PinSave this one to your Pinterest board for later, and make sure to go back and watch my Instagram stories to see videos of the process.
PinNext up, we’re keeping the DIY train going with a custom built hanging bed at The Riverside Retreat. You’ll definitely want to tune in for this one!
Pin
How to age wood
Make new wood look authentically aged with this simple technique
Active Time3 hours hrs
Total Time3 hours hrs
Keyword: wood frame, antique, vintage, aged wood
Cost: $0
Equipment
Drill
Wire brush attachment
Orbital or detail sander
Planer
Jigsaw
Materials
- Wood stool (or any wood piece)
- Wood stain
- Polyurethane or wax
- Dark wax (optional)
Instructions
Run your planer in random areas along the surface, creating irregular cuts and gashes
Make "saw marks" with the jigsaw by etching grooves across the surface, focusing on the ends/corners where wear would naturally occur
Use an orbital or detail sander to smooth down all of the rough and sharp edges
Run a wire brush (attached to a drill) across the entire surface of the wood to open up the grain
Stain the wood
Optional: use a dark wax to define the texture
Use polycrylic (or wax) to seal and protect the wood
Notes
If you enjoyed this look for less DIY, check out my DIY ‘limestone’ planter!
Pin
If you like this project, check out these other popular beginner budget DIYs from my Project Library!
- $10 canvas floating frame
- How to realistically age wood (the easy way!)
- Easy string light planters
- Board + Batten tutorial
Pin